![]() ![]() It works with a scope and a lens to enable the archer to pick out target details at greater distances. Smaller sized peeps include: 1/32″, 3/64″, 1/16″, 3/32″, and 1/8″ Peep Sight ClarifierĪ clarifier is a lens that some archers like to install to help clear up the target image further. Lighting is usually not an issue and smaller peep sizes offer a narrow aiming window. Larger sized peeps include: 3/16″, 7/32″, 1/4″, and 5/16″įor indoor target shooters, it’s recommended that you use smaller peep sights that allow you to dial in with more pinpoint accuracy. Smaller peeps can darken the sight picture, particularly in archers with sight difficulties. ![]() Common Peep SizesĬhoosing the right peep size comes down to your actual set-up and the level of light that you usually shoot in.īecause bow hunters tend to go out in mostly lower levels of light, larger peeps are often preferred. If you’re a hunter and you’re out in all different levels of light, the smaller your peep, the less light will be allowed in, making it virtually impossible to see through. If you move slightly off-centre, you should see that part of the circle has been cut off by the edge of the peep, giving you instant feedback on your alignment. ![]() That coloured circle should ideally be completely covered. When you look through your peep sight, you should see that the peep has perfectly eclipsed the sight housing. If your peep is too small, then your peep will appear within the sight housing with a circle of daylight around the outer edge.Īgain, you won’t be able to get the correct alignment because your peep circle will never eclipse the outer edge of the housing, making it difficult to know whether you’re exactly on target. You will also find that as you try to align your sights, one edge of your housing will likely be obscured, but you won’t be able to match the two circles exactly. If you select a peep that is too large you will see a large ring of daylight between your sight housing and the edge of your peep circle. You also need to consider the distances that you’re shooting and the levels of light if you shoot outdoors. When selecting a peep size you’ll need to remember that you need to have perfect alignment from your eye to the peep, and then to the sight housing. If you’re interested in learning how to aim in traditional archery, you might like to read this article. It’s a way to know that you’re aiming the exact same way each and every time. Peep sights take out a lot of the guesswork. But that kind of inconsistency can affect accuracy. Without a peep sight, your head can be out of alignment by the smallest of margins and you won’t be aware of it because all your doing is looking through the scope. You need to be able to look through your sight the same way each and every time. One of the keys to accuracy with a bow and arrow is consistency. You don’t need a peep on a bow, but what it gives you is another reference point to help you aim with consistency. Release only when you feel completely relaxed. Instead, allow it to float and move around the target. Try not to focus on keeping your peep sight pin completely stable. Once you have the peep aligned with the front sight housing, you need to make sure that they are now both aligned with the target.Īs the distances of your shot increase, you’ll need to adjust which pin you’re sighting through. Align Both Front and Rear Sights with the Target You need to perfectly eclipse the coloured housing with your peep sight tunnel in order for it to be correctly aligned. When looking through your peep sight it will appear as though you’re looking through a tunnel. On the front sight housing of the bow, you will see either a green, white or yellow circle. Look through your peep sight with your dominant eye. Align The Front Sight With The Peep Sight The top pin of your peep is usually set at 20 yards, with the rest at 10-yard increments. The basic principle of using a peep is to get the correct alignment between the peep, the front sight, and the target.īefore you get started, make sure that you have the pin sights adjusted to the right distances. Peep sights come in both tubed and tubeless varieties. When looked through, the archer aligns the sight with the sight housing and the target to provide that next level of accuracy and consistency. Fitted into the string, the peep sight is a small, circular aperture that, when at full draw aligns with the eye. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |